This guide is to help pilots add and use the PMS GTN750 (Premium) to navigate the London Heli Lanes.
This tutorial, in PDF format, shows you how to build your own, affordable, collective for any sim. It is focused on the mechanical side, so you will have to come out with your own electronic plans.
This kit, released with permission or X-Rotors, allows you to further customize their AW139 by adding new parts to the helicopter.
All the files necessary to print a bezel for the GTN 750.
With this file you’ll be able to 3D print a mount for your Knobster, which you can attach, laterally, to any surface.
With these 2 .stl files you’ll be able to print a small, simple handle to attach to your Logitech X-56 throttle, making it more natural to control your helicopter’s collective.
Looking for a cool and easy way to move your helicopter around? Check this out!
Every now and then, piracy strikes our community, and this was one of those times.
This is a callout gauge for helicopters in P3D v4 (64bit). As the name suggests it gives a height callout starting at 100ft and then at 50ft, 40ft, 30ft, 20ft and 10ft.
Official HeliSimmer.com livery for the VSKYLABS R66 for X-Plane.